CNC 2D-Natrue Master

High-precision movement: The nozzle positioning and motion accuracy error is controlled within ±0.1°, with multiple nozzles coordinating actions consistently, no individual errors, and no frame or step loss.
Easy programming control: Less control points and simple variable settings facilitate later programming adaptation to different scenarios.
Low-cost: Compared to similar water shape effect equipment, the power equipment is more streamlined. With optimized electrical control, no drivers or frequency converters and less cables are needed.
Low maintenance: With mature standard parts, fewer cable joints and mechanical connections, daily maintenance becomes simple.
Easy and quick installation: The set of equipment is installed and debugged as a whole, eliminating the single nozzle debugging process.
Water and light interaction: Water column shapes (such as undulation and rotation) synchronize real time with underwater lighting. Color and light dynamically change with water patterns, providing all-around, no dead-angle illumination.
Elegant yet powerful performance: Flexible nozzles are laid out in various topologies(straight lines, arcs, and curves)，and the ejected water takes multiple forms like droplets, segments and columns.

Effect Display

Technical Parameters
Specifications and Models			DD2D65	Remarks
Effect			0～25m
Water and Light Integration	Jet Device	Type	Connection Pipe Diameter DN65
		Nozzle Diameter (mm)	Direct Current Nozzle φ20～φ22
		Material	Nozzle made of engineering plastic ABS, others stainless steel 304
		Maximum Dimensions (Length X Width X Height)	390mmX110mmX670mm
		Weight	Net weight about 8kg; Gross weight about 9.5kg
	Underwater Water Distribution Light	Parameters	DMX512 RGB LED 27w/36w/54w/72w	Built-in cable 2m
		Material	Stainless steel 304 housing
Supporting Equipment Main Equipment		Solenoid Valve	DC24V/48V DN50 Stainless Steel 304	Built-in cable 2m
		Underwater Stepper Motor	2 units; AC 220V, Power ≈ 2KW, Rated Output Torque 450N.M
		Positioning System	4 Sensors
Mechanical Performance	Maximum X/Y Operating Angle	Upper Axis	96° (-46° to +46°)
		Lower Axis	192° (-96° to +96°)
Control Method			DMX512/Artnet
Waterproof Rating			IP68
Applicable Environment			Water springs (ponds, rivers, lakes, bays); Water depth ≥ 0.8m
Maintenance and Care			1. Regularly clean the surface of the equipment and floating debris in the surrounding water area 2. During freezing shutdown periods, drain water from pipelines; equipment must be inspected and maintained each time it is shut down

Keywords:

CNC 2D

Category:

Share to: